Page 2 of 2

Re: Where to buy - threaded stud...

Posted: 14 Jan 2018, 04:30
by peatop

Re: Where to buy - threaded stud...

Posted: 14 Jan 2018, 08:53
by shane
Just get some SS flat of suitable size and some SS bolts of the length required. Drill a hole slightly smaller than the bolt diameter through the flat. Then get a tap and die set (cheap from bunnings) and cut a thread through the hole to match the bolt. Screw the bolt up through and you're done. It should work out quite cheap and requires minimal skills. :up:

Re: Where to buy - threaded stud...

Posted: 29 Jan 2018, 23:17
by Jacko
peatop wrote:Ok by chance found what your after ;) http://www.dreamkayaks.com.au/railblaza ... mount-kit/
Also available at Capacity Sports Moorabbin $15:00 for two. (No affiliation)
https://paddlesports.capacitysports.com ... cmount-kit

Re: Where to buy - threaded stud...

Posted: 30 Jan 2018, 08:34
by Reeling
Jacko wrote:
peatop wrote:Ok by chance found what your after ;) http://www.dreamkayaks.com.au/railblaza ... mount-kit/
Also available at Capacity Sports Moorabbin $15:00 for two. (No affiliation)
https://paddlesports.capacitysports.com ... cmount-kit
Thanks, I ended up bying some 3mm aluminium flat bar. Drill and tapped and cut to size to slide in the groove without hitting the cap heads holding the track in place.