It is currently 21 Apr 2018, 12:43

Setting up EPIRB for Offshore

Discussion about gear used for offshore yakking.

Re: Setting up EPIRB for Offshore

Postby outback paul » 21 Dec 2017, 15:47

Thanks Shane, I was looking at the inside of the front hatch as a possibility, but the extra weight pulling down on the hatch as I'm trying to lift to stuff a long cooler bag (containing a gummy or two) into the hatch with one hand may be a problem. Perhaps the best location may be cable tied to the mast post inside the front hatch. As long as I can still get things in and out of the hatch without damaging the aerial on top of the EPIRB.
User avatar
outback paul
Qualified Fish Monger
 
Posts: 270
Joined: 01 Sep 2014, 21:06
Location: Doncaster East, Vic
kayak: Revo 13
Real Name: Paul

Re: Setting up EPIRB for Offshore

Postby Reeling » 21 Dec 2017, 22:00

I'll be interested to read/see where you end up mounting it as I always seem to struggle finding "optiminum" solutions on my revo 13.
Would it be an option to mount it to the lid of the rear hatch which wouldn't necessarily be used during trips out. Attach a shock cord or similar to it so you can at least pull the cord if you're still in your seat and need to make use of it.

Out of the way but not.
My kayak PBs - you gotta start somewhere:
Flathead 52 cm --- Squid 29 cm hood --- Gummy 83cm (55cm legal) --- Pinkie 38cm --- Leatherjacket 23cm-ish --- Southern Bluefin Tuna 20.5kg
Reeling
Qualified Fish Monger
 
Posts: 430
Joined: 22 Nov 2016, 20:20
Location: Newport, Melbourne
kayak: 2015 Revo 13
Real Name: Nath (Nathan)

Re: Setting up EPIRB for Offshore

Postby laneends » 21 Dec 2017, 22:10

outback paul wrote:Thanks Shane, I was looking at the inside of the front hatch as a possibility, but the extra weight pulling down on the hatch as I'm trying to lift to stuff a long cooler bag (containing a gummy or two) into the hatch with one hand may be a problem. Perhaps the best location may be cable tied to the mast post inside the front hatch. As long as I can still get things in and out of the hatch without damaging the aerial on top of the EPIRB.


If you are in trouble you really dont want to be opening hatches if possible
User avatar
laneends
Needs a life (forum tragic)
 
Posts: 5794
Joined: 25 Jan 2013, 15:59
Location: Melbourne, Bundoora
kayak: Red Quest 13, Ivory Quest 11,Ivory Revo 16
Real Name: Keith

Re: Setting up EPIRB for Offshore

Postby gus fitzroy » 31 Dec 2017, 08:51

Hi Gents,

I ended up attaching mine just beyond the foot pedals on a slight angle along the foot rail grooves (Revo 13). It's pretty convenient for me there with no impediment on any of my equipement and leg space. I do have short legs, but I'm pretty sure it shouldn't get in the way of a longer pedal stroke. I think the pedal clears it, but will have another look. I clip the epirb on the cord to the front hatch elastic straps and would be able to access and activate the EPIRB from either side of the yak if I was in the water. I wouldn't need to move the device if the yak was upright, but should be able to take it out of the mount if required. :)
gus fitzroy
Lord of the fish
 
Posts: 1000
Joined: 22 Dec 2012, 17:22
Location: Coburg
kayak: revo 13
Real Name: Nath

Re: Setting up EPIRB for Offshore

Postby inshorebrawler » 31 Dec 2017, 14:43

I have the KTI epirb and will be keeping it the hull of the AI with my emergency dry bag that contains parts, torch, flares, rope, emergency blanket and water. When I go offshore or predicted rough weather or night session I strap it the the rear tank well.
0401314820
My name is Frank and I'm addicted to Hobies.
User avatar
inshorebrawler
Square eyes
 
Posts: 983
Joined: 18 Jan 2015, 01:45
Location: Sunbury
kayak: Dune AI
Real Name: Frank

Previous

Return to Gear

Who is online

Users browsing this forum: No registered users and 1 guest