Compliant SWAMBO.
- happyas
- Lord of the fish
- Posts: 1579
- Joined: 18 May 2012, 20:21
- kayak: stealth evo 465
- Real Name: Larry
- Location: Mt Evelyn
Compliant SWAMBO.
Due to an inheritance my wife has just ordered a new car. Yes I "helped" her choose the make and model sort off but she settled on an updated version of her old Honda CRV. "Hmmmm" I said, "are we going to need a towbar". We now have a towbar being fitted. Good for towing a yak trailer. "What about a set of cross bars for the roof rack?" I asked. She actually agreed that I might need to carry my yak from time to time. Win win. Question is, how do I rear load my yak over a shark fin antenna. I thought of maybe a cushioned block of wood thicker than the height of the fin with a hole in it to fit over the fin. rest the rear of the yak on that and slide it up and onto the yak holders. Any thoughts would be appreciated.
- spider25160
- Square eyes
- Posts: 586
- Joined: 26 Aug 2011, 21:56
- kayak: Hobie itrek 11
- Real Name: David
- Location: Portland
Re: Compliant SWAMBO.
mmmmm no comment on the grounds that if it all goes horribly wrong I don't want to be in the firing line
Your mind is like a Parachute! It only works when it is open
Yak PB's: Snook 68cm, Black Bream 38cm, KGW 50cm, Couta 72cm, snapper 45cm Australian Salmon 64cm Redfin 37cm EP 39cm Blue throat wrasse 46cm Dusky Flathead 56cm
Yak PB's: Snook 68cm, Black Bream 38cm, KGW 50cm, Couta 72cm, snapper 45cm Australian Salmon 64cm Redfin 37cm EP 39cm Blue throat wrasse 46cm Dusky Flathead 56cm
- shane
- Vyak Addict
- Posts: 7340
- Joined: 07 Sep 2011, 20:54
- kayak: Hobie AI, PA14, Quest and an ebay tandem
- Real Name: Shane
- Location: Moonee Ponds
Re: Compliant SWAMBO.
Do a side load. If the CRV has roof rails then it's even easier. With my new Skoda Scout (and older Kia Sorento) I put a towel over the roof rail then lift the nose onto it at an angle. The roof rack sitting up higher than the rail stops the yak sliding forward. Then just lift the rear while you slide it up on the rail and swing around onto the racks. Unloading is the same in reverse.
You've got to be careful with antennas. I snapped one off doing a rear unload once.
You've got to be careful with antennas. I snapped one off doing a rear unload once.
0408 565 763
- happyas
- Lord of the fish
- Posts: 1579
- Joined: 18 May 2012, 20:21
- kayak: stealth evo 465
- Real Name: Larry
- Location: Mt Evelyn
Re: Compliant SWAMBO.
Thanks Shane. I will have a go when vehicle is delivered. Spider, might be a safe course of action.
- laneends
- Vyak Addict
- Posts: 6641
- Joined: 25 Jan 2013, 15:59
- kayak: Quests 11 13 Adventure 16 Revo 16 ORSki epic k1
- Real Name: Keith
- Location: Melbourne, Bundoora
Re: Compliant SWAMBO.
Is the yak narrow enough to be loaded to one side rather than centrally? Mine is loaded offset to one side, and I can slide a second one next to it if I wish. i don't said antenna issue, but it wouldn't be a problem if i did. But then my roofs probably wider than yours with overhang style bars..
- Digger
- Vyak Addict
- Posts: 6261
- Joined: 05 Sep 2010, 07:20
- kayak: Tinny, Piers anywhere I can!
- Real Name: Rob
- Location: Beautiful East Gippsland
Re: Compliant SWAMBO.
Congrats on the Honda, best thing we ever did!
I hate to be a downer but the dealer quoted us $1800 for a towbar for our Accord.
Decide to keep my XR6 as a tow vehicle after that.
I hate to be a downer but the dealer quoted us $1800 for a towbar for our Accord.
Decide to keep my XR6 as a tow vehicle after that.
- woowoowoo
- The force is strong in this one
- Posts: 77
- Joined: 08 Feb 2010, 09:59
- kayak: Hobie Outback
- Real Name: Andrew
- Location: Peoples' Republic of Brunswick
- Contact:
Re: Compliant SWAMBO.
I have a similar situation with my Skoda Yeti. Loading from a slight angle with the K-Yak loaders works quite well.
--
Andrew aka:woowoowoo http://www.woowoowoo.com ~~~ <*))))>< ~~~
Andrew aka:woowoowoo http://www.woowoowoo.com ~~~ <*))))>< ~~~
- vicyak
- Lord of the fish
- Posts: 1204
- Joined: 17 Mar 2015, 16:24
- kayak: Hobie PA 14
- Real Name: Brian
- Location: Coburg
Re: Compliant SWAMBO.
Better yet. My trailer is for sale. Plenty of storage and no risk on scratching that new car.
-
- Square eyes
- Posts: 545
- Joined: 18 Jul 2015, 20:43
- kayak: 2015 Outback
- Real Name: Erik
Re: Compliant SWAMBO.
[quote="shane"]Do a side load. If the CRV has roof rails then it's even easier.
Yep, do the side load, but use the extender bar on the cross bar.
That means you just lift the front up on to extender, then the rear and slide across.(or vice versa if you want stern up first)
I think SLH have a video somewhere showing how it's done.
Those molded antenna can cost a motza if you 'upset' it!
Ah, the old fishing pants on the new leather conundrum eh?
Congrats on the change in circumstances, although commiserations for the way it has come about?
Yep, do the side load, but use the extender bar on the cross bar.
That means you just lift the front up on to extender, then the rear and slide across.(or vice versa if you want stern up first)
I think SLH have a video somewhere showing how it's done.
Those molded antenna can cost a motza if you 'upset' it!
Ah, the old fishing pants on the new leather conundrum eh?
Congrats on the change in circumstances, although commiserations for the way it has come about?
- happyas
- Lord of the fish
- Posts: 1579
- Joined: 18 May 2012, 20:21
- kayak: stealth evo 465
- Real Name: Larry
- Location: Mt Evelyn
Re: Compliant SWAMBO.
Hi Digger. Yeah $2000 for the towbar and oil cooler. As for fishing pants on leather, SSSSSSH. It is a fairly narrow yak, an older stealth evo, but I have always loaded it stern first, rear load onto my Astra. That way the rudder is not left taking the weight of the upended yak.We are having Honda cross rails fitted but haven't looked at yak cradles yet. I don't think my current ones have the correcty shaped area where they clamp onto the rails. I think the Honda rails imitate the whispbar type section whereas my current cross bars are square section..