[/s][/s]hi guys here is my hobie mirage evolution. this is my 3rd kayak and 2nd season fishing on it.
purchased the yak totally stock as a rock.
i mainly fish at altona if ya see me say hi i am friendly lol .

Did all the upgrades and made everything myself including.
anchor trolley.
x2 rod holders (ebay).
create with rod holders/trolley holders.
led strip light on pvc pipe with battery in a small esky.
berley pot.
anchor.

#next is a fishfinder and gps.
better quality rod holders x2.
decals.
flag with stick.

check out some pictures . i am all ears for any advice or suggestions regarging my kayak eg, fish finder/gps, quality rod holders,

Looks the part, now to get a bit of ink and some big scales on your deck. Bit of blood just for effect.

Hvalross wrote:Looks the part, now to get a bit of ink and some big scales on your deck. Bit of blood just for effect.

thanks. i caught these couple weeks ago

Even better.

got these for my light setup

i am going to mod the light a little more i need it to dismantle easier .
and i am going to cut the light strip down from 5m to 2m max as its draining my battery so much (even though iam only in dark for an 1 or so)

time2fish wrote:i am going to mod the light a little more i need it to dismantle easier .
and i am going to cut the light strip down from 5m to 2m max as its draining my battery so much (even though iam only in dark for an 1 or so)

Also put the dimmer switch on it
https://www.ebay.com.au/i/221786050351? ... dispItem=1

laneends wrote:

time2fish wrote:i am going to mod the light a little more i need it to dismantle easier .
and i am going to cut the light strip down from 5m to 2m max as its draining my battery so much (even though iam only in dark for an 1 or so)

Also put the dimmer switch on it
https://www.ebay.com.au/i/221786050351? ... dispItem=1

Where would I install that where it can be assemble easy ? My whole setup is attached to the crate hmm something to think about thanks

time2fish wrote: Where would I install that where it can be assemble easy ? My whole setup is attached to the crate hmm something to think about thanks

Just wire it in before the LED strip connection and attach it to the light pole. I've been running one of these for a year and also use them on my all-in-one battery/light setups. They allow about 6 different light levels, different flash patterns and can be used as a simple on/off switch. Make sure you seal the ends watertight and it should last a while.

shane wrote:

time2fish wrote: Where would I install that where it can be assemble easy ? My whole setup is attached to the crate hmm something to think about thanks

Just wire it in before the LED strip connection and attach it to the light pole. I've been running one of these for a year and also use them on my all-in-one battery/light setups. They allow about 6 different light levels, different flash patterns and can be used as a simple on/off switch. Make sure you seal the ends watertight and it should last a while.

My pole setup would be too high to wire it b3fore the led strip I'll have to cut the pole down a tad .I'll work something out on the weekend .does sound handy and would save battery .ty