I had lost it for a couple of days until I re-scanned my channels, now I get it but not the guide.

Bunyip, just wondering which drone you have I have just picked up a phantom 3 standard myself.

Geoff

Zak, if you go the silicon option glue a piece of foam inside to the bottom of the yak with a cut out just a bit bigger than the transducer. head off down to bunnings and look for some silicon made by sikaflex used for concrete joints. This stuff is like honey and self levels. Just put some in the g...

just wondering what sort of drone are you flying.

Geoff

First off thanks for the replies. Have talked to a service on the phone he also has been very helpful. Any way been able to get the unit apart (not that hard after all) and looks like it is the damper motor of the micro switches which is on the damper motor assembly. Just got to wait for the roof to...

Every one thanks for the replies, the unit is way out of warranty as it is around 14 years old I was going to try and contact the company that originally installed the system as when I called today there was no answer and then I remembered that most people had the day off, not me unfortunately. Geoff

Hi all, the unit is a Brivis contour and it trips the safety switch every hour within 5-10 mins anyway. The unit has power connected but is not running when the safety switch trips. I was thinking problem could be with the controller board because of the timing. Thinking maybe a capacitor charging a...

Anyone know of or is a air conditioner mechanic as I have issues with a Brivis evap cooler.


Geoff

Received mine today after the first one was lost between brightlights and langwarrin, here it is just sitting on the bin outside connected to the blue battery pack. Over all looks good to me in my opinion if some body does not see this at night they must be blind. Colour is cool white.

Just wondering if anyone has mounted one of the new chirp type sounders as a through hull setup and how does it perform.

Thanks