Page 1 of 2

Fitting out the 2013 Hobie outback

Posted: 27 Dec 2020, 13:13
by Ghurkin
Hi all,I bit the bullet and bought a 2013 Hobie outback,my old left hand shoulder suffers after paddling so it was time. I'd love to see some options that people have decided to use for rod holders and storage etc, show us what you've done :)

Re: Fitting out the 2130 Hobie outback

Posted: 30 Dec 2020, 13:33
by zarbs
I'm certainly interested in seeing what a 2130 Outback will look like :D :D

Re: Fitting out the 2130 Hobie outback

Posted: 30 Dec 2020, 17:20
by erik the viking
30mm plumbing pipe to suit.
This way with the T's, it gives you more room to get the esky closer to the seat and not waste so much of the rear well.
And for the older body, it makes it easier to access.
The uprights have a slot cut in them for the reels to sit down below the top flare and also a rotatable locking ring to stop the rods falling out if you happen to turtle up.
Outback Rocket Launcher Setup2.jpg

Re: Fitting out the 2130 Hobie outback

Posted: 30 Dec 2020, 20:42
by Reeling
zarbs wrote:I'm certainly interested in seeing what a 2130 Outback will look like :D :D
The way the outback is going, you'll need a crane to lift it

Re: Fitting out the 2130 Hobie outback

Posted: 10 Apr 2021, 13:51
by Ghurkin
zarbs wrote:I'm certainly interested in seeing what a 2130 Outback will look like :D :D
dam it wont let me edit that :lol:

Re: Fitting out the 2130 Hobie outback

Posted: 10 Apr 2021, 13:52
by Ghurkin
erik the viking wrote:30mm plumbing pipe to suit.
This way with the T's, it gives you more room to get the esky closer to the seat and not waste so much of the rear well.
And for the older body, it makes it easier to access.
The uprights have a slot cut in them for the reels to sit down below the top flare and also a rotatable locking ring to stop the rods falling out if you happen to turtle up.
Outback Rocket Launcher Setup2.jpg
That looks great Eric :thumbsup:

Re: Fitting out the 2013 Hobie outback

Posted: 11 Apr 2021, 13:00
by HaTTerS
Ghurkin wrote:
zarbs wrote:I'm certainly interested in seeing what a 2130 Outback will look like :D :D
dam it wont let me edit that :lol:
Edit what?
:thumbsup:

Re: Fitting out the 2013 Hobie outback

Posted: 12 Apr 2021, 14:46
by Ghurkin
The original post title, hatters, I got it wrong :lol:

Re: Fitting out the 2013 Hobie outback

Posted: 12 Apr 2021, 19:07
by HaTTerS
Ghurkin wrote:The original post title, hatters, I got it wrong :lol:
As I said... Edit what? Looks good to me (now) ;)

Re: Fitting out the 2013 Hobie outback

Posted: 13 Apr 2021, 20:52
by Babylon
To much home brew. lol :yahoo: :yahoo: