Page 4 of 7

Re: Anchor Answer for Tormentor (& others)

Posted: 29 Apr 2012, 20:31
by kads
Turtle wrote:Ive made up my anchor setup the same as this but for the life me I cant find Reflective adhesive tape in Geelong. Any Ideas
http://www.ebay.com.au/sch/i.html?_from ... ctive+tape


I personally like this stuff....
http://www.ebay.com.au/itm/Diamond-Grad ... 27bafafa8a

Re: Anchor Answer for Tormentor (& others)

Posted: 29 Apr 2012, 21:55
by Jenko
Bunniongs, any sign shop, safety gear supply joints sell reflective tape.

Re: Anchor Answer for Tormentor (& others)

Posted: 01 May 2012, 22:19
by Turtle
Cheers cads for that ebay for some reason didnt even pop into my mind. I've tried Bunnings and other joints and they sell nothing but idiot tape.

Re: Anchor Answer for Tormentor (& others)

Posted: 21 Oct 2012, 08:45
by Babylon
Time to bump this with recent losses of anchors some good tips in here boys from Rhino.Cheers Babylon :thumbsup:

Re: Anchor Answer for Tormentor (& others)

Posted: 30 Oct 2012, 13:24
by Frank
Babylon wrote:Time to bump this with recent losses of anchors some good tips in here boys from Rhino.Cheers Babylon :thumbsup:
the red plastic reel floating there @ ricketts ... is that yours?

Re: Anchor Answer for Tormentor (& others)

Posted: 30 Oct 2012, 14:11
by Babylon
Frank wrote:
Babylon wrote:Time to bump this with recent losses of anchors some good tips in here boys from Rhino.Cheers Babylon :thumbsup:
the red plastic reel floating there @ ricketts ... is that yours?
No Frank i have to fish to loose things mate.Cheers Babylon :thumbsup:

Re: Anchor Answer for Tormentor (& others)

Posted: 31 Oct 2012, 12:44
by Knogg
I'm curious on these anchors that have needed to be cut or left what set up they were.

I have a 1.5 kg folding grapple type. It's secure to the underside and cable tied to the shaft for backward removal if ever need be. The cable ties singularly have been selected to break with enough force but I have used 2 with slack do its not doubled strength needed. Just a 2 stage pull and snap pull and snap.

I have 1 m of chain or a little more. The chain looked to me as another dangerous snag point so it is also attached to the main rope by cable ties also. This should ensure I always get my anchor loose.

There is always still the possibility the main rope can snag and just plain bad luck screw you over. But I think most of my bases are covered.

And I tested my rig and every thing worked as intended. I fixed the anchor to something and made sure everything broke where and how it was supposed to. I also tried to replicate correct angles.

Re: Anchor Answer for Tormentor (& others)

Posted: 11 Feb 2013, 08:47
by ndoggy
handy post mate. as ive just got into the game how handy are the drift shutes and how do they work do they just slow you down?

Re: Anchor Answer for Tormentor (& others)

Posted: 28 Feb 2013, 12:32
by Bretty
ndoggy wrote:handy post mate. as ive just got into the game how handy are the drift shutes and how do they work do they just slow you down?
It will depend on your style of fishing if you fish bait and anchor the drift Shute is pointless.
If you fish lures then a Shute is a must have it slows your drift down. If I'm drifting at 10kph and put the Shute out I slow down to about 2.5-3kph :up:

Re: Anchor Answer for Tormentor (& others)

Posted: 28 Feb 2013, 16:33
by wokka1
Keep in mind it only stops wind drift, won't slow you in tidal flow.